| Forums | Sign Up | Reply | Search | Statistics | Home Page |
Online now: Guests - 1
Members - 0
Most users ever online: 2 [23 Jul 2019 20:03]
Guests - 2 / Members - 0
Matrix Control integrexmachinist.com community built on miniBB / Matrix Control /

Control will not "Boot" to Mazatrol screen

 
Jonathan Arthur Ciener
Forums Member
#1 | Posted: 1 Aug 2013 13:38
Reply 
My Matrix control INT200MKIV is now having another problem. After replacing the hard drive I have only gotten 3 hours out of it. Now the machine only "boots" as far as the hardware checking page and stops on that screen (black with white writing). There is no Alarm it just does not go past that page. Earlier, twice, it did but stopped at a full white screen which is normally just before the Mazatrol screen. But now it will not go that far. Does anyone have any suggestions of what may be causing this?
Oglinchen
Forums Member
#2 | Posted: 7 Aug 2013 12:28
Reply 
the hard drive must be installaled with the nc-unit. thats are 25 pages in the instructions for the mitsubishi-engineers.
after replace the hard drive you must copy all datas from the memory card and the nc-unit to the hdd. thats a work for a service engineer(6 hours work)

connect both hard drive on a pc, and copy all datas from the old to the new and then test it

with greets oggi
 

:);):-p:-(More smilies...  Disable smilies in post
Your reply
Bold Style  Italic Style  Image Link  URL Link 

» Username  » Password 
Only registered users are allowed to post here. Please enter your login/password details upon posting a message, or sign up first.
 

Forums are powered by miniBB®