Wanted to say hi and have a few questions on 200sy with fusion control

I have a 200sy I picked up and finally have back up and running after replacing control and he. Unfortunately I lost almost everything and the backup mazak and mitsubishi had was almost useless. I ended up getting the parameters set correctly mostly. It is running pretty good but have a few issues.

It lost all the programs. I was able to find a macro from another machine that got my tool change to work. I asked mazak and they said the machine doesn't need a macro for tool changes. Does anyone else have a list of macros that may be needed for this machine? They would be 8000 and 9000 series programs. Which you have to change a parameter to see. Mak has not been any help.

Related to the above I found info on g68.5, g125 and g128 macro for plane shift. What is the difference? No one has been able to explain this to me?

Our integrexes dont have those macros or they are just not exposed, but I'll ask my machinist as he has a long history with Mazaks. I'll let you know what I find out.

p109 bit 0 set to o allows editing 9000 series programs set to 1 protects 9000 series programs

P109 bit 1 set to 0 allows you to display 9000 programs set to 1 hides the 9000 series programs
P109 bit 4 set to 0 allows editing 8000 and 9000 series programs set to 1 to prevent editing
P109 bit 5 set to 0 allows you to see 8000 and 9000 series programs set to 1 hides 8000 series programs.


I think to see and copy the actual program in the 8000 and 9000 range p109 should look like P109=00000000 if you make changes to any parameter always record the original setting.

Parameters k82 through k96 show machine macro calls.